Product
Description Description:
Paint Spray hose is a polyester reinforced
hose which incorporates a nylon liner with
a polyurethane outer cover. The combination
of these materials and method of construction
gives a strong durable hose with excellent
abrasion resistance. The hose is flexible,
lightweight and has good kink resistance.
Applications: Suitable for use in the
conveyance of paints, including both high
and low viscosity; acrylics, metallics, lacquers,
varnishes and vitreous enamels and a wide
range of chemicals. May be used for low pressure
spray equipment.
Temperature Range:
-30°C/+70°C, up to 100°C for short
periods.
Technical
Data
ID
mm inch
OD
mm
Maximum
working pressure
at 20°C bar (i)
bar
Coils (ii) m
Min Bend Radius (iii)
mm
Weight
30m Coil kg
6.3
8
9.5
1/4
5/16
3/8
12
14
15.5
18
14
14
30
30
30
84
98
124
2.70
3.00
3.50
Notes:
Maximum Working Pressure is based on
a factor of safety of 4:1 on short term
burstpressure at 20°C. If the temperature
increases, please refer to the temperaturepressure
charts.
Lengths details above are standard,
however variations may be available subject
to minimum order quantities.
Bending diameter information is intended
as a guide to the minimum bend radius
at 20°C ambient temperature without
restricting the bore. It does not mean
that the hose cannot be bent below the
given dimensions, but restriction is likely
to occur.
